-------------------------------------------------------------------------------------------------------------------------------------
THIS IS A GUIDE ON REPAIRING YOUR BEYONWIZ IP-100 MODEL POWER SUPPLY UNIT
WARNING – IF YOU HAVE ANY OTHER MODEL – DO NOT FOLLOW THIS GUIDE
EMAIL ME FOR FURTHER ASSISTANCE (SEE REVISION HISTORY FOR CONTACT DETAILS)
Last updated 28/01/2013 (Changes and updates listed in the revision history)
-------------------------------------------------------------------------------------------------------------------------------------
** BRAND WARNING – DON’T USE SUNTAN CAPACITORS TO COMPLETE THIS REPAIR **
...Or any other cheap brand for that matter. Please ensure that you follow this guide carefully, it tells you
which brands to use and even lists part numbers further down.
Your local electronics enthusiast shops are not always a good place to source "good quality" electronic
components. Try a more professional outlet such as Element 14 (Farnell) or RS Components or even XON
Electronics. All can be ordered online and delivered to your door - it is worth the few extra days in delivery!
-------------------------------------------------------------------------------------------------------------------------------------
** REPAIR THREAD - AMMENDMENT NOTE **
The works contained in this guide are based purely on my own knowledge of repairing this model of power
supply combined with 20 years’ experience in the industry. As the age of these units increases, and therefore
the amount of running time each machine has received increases, new components may be discovered as
faulty. When this occurs I will update the guide to detail any new possible issues and resolutions that
Beyonwiz owners may need to know about.
This repair guide is for the newer model Beyonwiz PSU’s found many of the Beyonwiz units. It will require
AT LEAST 2 HOURS of your time to complete it properly. The repair is not just about replacing capacitors,
there is more to it than that and I urge you to read it carefully and follow ALL recommendations along the way
to ensure that your PSU is working correctly at the end of the repair.
-------------------------------------------------------------------------------------------------------------------------------------
Why would you want to attempt to do this repair? (Besides the fact that you love your Beyonwiz)…
Here is a list of reasons that *may* be getting you frustrated with your machine.
* HDD checks being performed regularly for no reason, i.e., each time you power the unit on
* Unstable operation, boot failure & system lockup
* Lost recordings & corrupt HDD (this can also be caused by the SATA cable which can fail also)
* HDD isn’t detected by the BW but the HDD has tested ok in a PC or other PVR
* Colour distortion & abnormal looking output through HDMI or no HDMI output at all
* ERROR 0000 or E:BOOTING on system start-up (most common fault)
* No DISPLAY on the front of the machine but the HDD spins up immediately when mains power is supplied.
* Wired network failure & USB failure (very bad sign – stop using machine ASAP if this occurs)
NOTE – This is a broad list of the common failures for the Beyonwiz machines using this model PSU.
Failures however are NOT limited to this list only and other issues may also be experienced. If this sounds
familiar then it might be time for you to give your beloved Beyonwiz a makeover.
THIS MODEL PSU IS CURRENTLY ONLY FOUND IN THE BEYONWIZ DP-P2. THERE ARE MORE
REPAIR GUIDES AVAILABLE ON THE BEYONWIZ FORUM FOR OTHER MODELS OF BEYONWIZ
MACHINES.
-------------------------------------------------------------------------------------------------------------------------------------
Kommentare zu diesen Handbüchern