Beyonwiz FREEVIEW FV-L1 Bedienungsanleitung

FV-LVersion 1.52_Eng

3 1. Package Contents The following items are included in the box. Please check all package contents before using your product.  FV-L1  Remote Co

Advanced Setup 93 1-5. File Player 1) Resume Play You can control the behaviour of the starting position for playback of files that have already been

Advanced Setup 94 1-6. Preference 1) Keyboard Order You can control the behaviour of the remote control keypad when using the NUMERIC buttons to ente

Advanced Setup 95 2. Management You can upgrade or initialize your FV-L1 in this menu. 2-1. Firmware 1) Firmware Information This displays a pop-up

Advanced Setup 96 Use the UP/DOWN buttons to select a device and press the OK button (only for “Network” and “USB” device types). Now use the f

Advanced Setup 97 3) Firmware Upgrade OTA You can upgrade your FV-L1 FW by OTA(Over The Air). Press the OK button for manual update. Use the fol

Advanced Setup 98 2-2. HDD 1) HDD Information This displays a pop-up window with the current internal hard disk drive (HDD) information, as follows;

Advanced Setup 99 3) Check HDD If the FV-L1 is turned off incorrectly, it is strongly recommended that you check the internal HDD. If you select thi

Advanced Setup 100 4) Format USB Storage In order for the FV-L1 to be able to write files to a USB storage device, the USB device must be formatted

Advanced Setup 101 2-3. Initialize 1) Clear Service Information You can clear all the scanned services information. If you select this menu item wit

Advanced Setup 102 3) Clear IceGuide Disk Cache The EPG information from IceTV is stored on the internal HDD (see “Ice Guide” section in Chapter 4

4 This page intentionally left as blank.

Troubleshooting Guide 103 10. Troubleshooting Guide Before contacting beyonwiz Technical Support, please check this Troubleshooting Guide and try al

Troubleshooting Guide 104 strength and/or quality is adequate. If not, please contact an authorised antenna service agent or licensed contractor to s

Troubleshooting Guide 105  Check to ensure that the other devices on your network are configured correctly to connect with another network device. Th

106 This page intentionally left as blank.

Specification a Specification Main System Main Processor 200MHz RISC CPU HDD 320 or 500GB (SATA) Tuner & Channel Decoder Dual Tuner DVB-T C

Warranty Conditions b Warranty Conditions 1. Only the original invoice/receipt issued by the dealer will be accepted by beyonwiz as proof of purchas

WEEE Information c WEEE Information Correct Disposal of This Product (Waste Electrical & Electronic Equipment) This mark, sho

Contact Beyonwiz d Contact beyonwiz beyonwiz Australia [email protected] www.beyonwiz.com.au Some features and in

Version 1.52_Eng

Introduction 5 2. Introduction 1. FV-L1 Highlights As a HD (High Definition) multimedia epicentre, the FV-L1 supports various ways of connecting to H

Introduction 6 2. Front Panel 2-1. Buttons Five buttons are placed on the front panel.  STANDBY Button: it switches the FV-L1 between the operatio

Introduction 7 1 Indicates hard disk space used. 2 Lights when there is no space left on the HDD. Lights when there is no time information. 3

Introduction 8 4. Remote Control 4-1. Operating FV-L1 In order to operate the FV-L1 with the enclosed remote control, please select STB mode by pre

Introduction 9 4-2. Operating TV set The enclosed remote control can also be used to control a TV set provided by major TV manufacturers. In or

Introduction 10 JVC 207 212 247 264 323 385 LG 208 215 224 229 253 286 307 344 374 385 387 410 412 NEC 205 207 2

Introduction 11 4-3. Remote Control HEXA Code The picture below and table on the right provide you with information to allow you to program your

12 This page intentionally left as blank.

Welcome Message i Welcome Message Thank you for choosing a beyonwiz FV-L1, the epicentre of your home entertainment network. The FV-L1 supports all th

How to Connect 13 3. How to Connect 1. A/V Connection Depending on the A/V equipment you own, there are various ways you can connect the FV-L1. To ch

How to Connect 14 1-2. Audio Connection To connect your FV-L1 to your TV or audio system, the following options are available;  S/PDIF digital au

How to Connect 15 3. Ethernet Connection 3-1. Wired Connection Using a Network Router (LAN) In order to fully utilize the FV-L1, it is strongly rec

How to Connect 16 3-2. Direct Connection to a PC With this configuration, you can share contents with a PC but the FV-L1 cannot access the interne

How to Connect 17 3-3. Direct Connection to Internet With this configuration, you cannot share contents with a PC through your home network. For t

18 This page intentionally left as blank.

Quick Setup 19 4. Quick Setup This chapter guides you through the basic set up of your FV-L1 so that you can utilise its basic features. In orde

Quick Setup 20 1-1. Quick Setup of Video Output Format If you can already see a picture on your TV screen, you can skip this section and go on to th

Quick Setup 21 1-2. Basic Operation 1) Enter and Exit Setup Mode You can enter the setup mode by pressing the SET-UP button on the remote control.

Quick Setup 22 3) How to Change Configuration In the setup menu, there are several ways to change configuration. Here are three examples of configura

Precaution ii Precaution Read this manual carefully before using this product. The cautions described below contain important information about saf

Quick Setup 23  On-screen keyboard: If you need to input alphabetic characters, a “Keyboard Input” pop-up window will be displayed. You can move t

Quick Setup 24 2. Configuration 2-1. Time Setting The date and time information is used to start timer recordings. Therefore, you need to configu

Quick Setup 25 2-2. A/V Output Setting You need to set the video and audio configurations to suit your TV and audio equipment. Make sure the video

Quick Setup 26 2) Audio Outputs The FV-L1 supports 5.1ch audio via the RCA connectors on the rear of the unit and will decode and output Dolby Digita

Quick Setup 27 2-3. Service Scan Before you can watch a broadcasted service, you need to scan for services first. The scanned services will be st

Quick Setup 28  Start Scan: After selecting your scanning range, select Start Scanning and then press the OK button. On the screen, the scanning

Quick Setup 29 2-4. LiDiC (Line-in Digital Converter – available separately) The LiDiC can receive either Composite or S-VIDEO signals from one or t

Quick Setup 30 3. Network The FV-L1 supports an Ethernet (LAN) interfaces. This section will guide you on how to configure the network inte

Quick Setup 31 3-2. Ethernet Setting 1) Automatic Configuration If you have selected “LAN” as your network interface, all items to be configured f

Quick Setup 32 2) Manual Configuration If you set “DHCP” to “Disable”, you must input the network settings manually. Use the NUMERIC and LEFT/RIGHT

Precaution iii WARNING If the product is mishandled, the user might receiver a serious or minor injury. Damage or loss to the user’s property may al

Quick Setup 33 3-3. Ice Guide The FV-L1 supports IceTV service through the Internet. If you have an IceTV account, and wish to utilise this service

Quick Setup 34 3-4. WizPNP WizPNP enables sharing of recorded files with other beyonwiz products and PCs. The following picture illustrates how Wiz

Quick Setup 35 2) Set as WizPNP Server Setting the FV-L1 as a WizPNP server allows access from another beyonwiz product which has been enabled as

Quick Setup 36 3-5. Windows Sharing The FV-L1 can access files in a shared folder on your PC. This function requires configuration in the followin

STB & PVR Function 37 5. STB & PVR Function The FV-L1 supports various ways of enjoying multimedia content. These functions are divided

STB & PVR Function 38 2) Change Service with Service List The service list contains all the broadcasting services your FV-L1 can receive. Pre

STB & PVR Function 39 3) Other Ways to Change Service There are other ways of changing services, as follows;  CH+/CH- buttons: Press the CH+

STB & PVR Function 40 1-2. Information Box You can view information about the current service and the current program using two information boxe

STB & PVR Function 41 1-3. Volume Level Adjust Use the VOL+/VOL- buttons respectively to increase or decrease the level of the analogue and the

STB & PVR Function 42 1-5. Subtitle and Teletext Service 1) Subtitle Service If you wish to view subtitles for the program, press the SUBTITL

Precaution iv This symbol is intended to alert the user to the presence of un-insulated “dangerous voltage” within the product’s enclosure

STB & PVR Function 43 1-6. Sleep Timer The sleep timer can be used to set the FV-L1 to turn off automatically at a specific time. To set a ti

STB & PVR Function 44 2. Service Edit 2-1. Service List Edit You can edit the service list to lock, delete or rename services. Press the LIST

STB & PVR Function 45 2-2. Favorite Group A favorite group is your personal collection of TV or radio services. Up to 20 favourite groups can

STB & PVR Function 46 4) Service Change on Favorite Group Select a service in a favorite group using step 2 above. You can now change service

STB & PVR Function 47 3. PVR Functions The major functions of a PVR are time-shifting and recording. This allows you to pause or rewind live

STB & PVR Function 48 3-2. Instant Recording To record the current service and store it on the HDD instantly, press the REC button. A recording

STB & PVR Function 49 NOTE  If there is only one program in the time-shift buffer, the options “Current Program” and “All” have the same mean

STB & PVR Function 50 3-3. Timer You can set the FV-L1 to automatically record programs by setting timers. The timer function can also be used

STB & PVR Function 51 2) Add New Timer To set a new timer, press POP-UP then OK to display the timer list. Then press the RED button to displ

STB & PVR Function 52  Recurrence: Set the recurrence of the recording (if any). Use the LEFT/RIGHT buttons to select one of the following opt

Precaution v Copyright This manual is protected by copyright laws. Copy, use, reproduction of this manual in part or w

STB & PVR Function 53 3) Edit Timer To modify an existing timer, press POP-UP then OK to display the timer list. Then use the UP/DOWN buttons to

STB & PVR Function 54 5) Power Off during Recording If you attempt to put the FV-L1 into standby mode while a recording is in progress, a “Power

STB & PVR Function 55 3-4. Trick Mode Operation If you are watching a service while it is being recorded, or change to a service which is already

STB & PVR Function 56 3-5. Recording Control 1) Pause/Resume and Stop Recording To pause recording for a period of time (e.g. to skip comm

STB & PVR Function 57 2) Change Recording Options while Recording You can change some of the recording options even after the recording has start

STB & PVR Function 58 3-6. Timer Conflict The FV-L1 can record two programs simultaneously. If you attempt to record more than two programs simu

STB & PVR Function 59 2) Timer Overlaps Two Current Recordings If a new timer begins while two recordings are already in progress, the following t

STB & PVR Function 60 4. EPG (Electronic Program Guide) The EPG (Electronic Program Guide) is a table which displays current and upcoming TV progr

STB & PVR Function 61 buttons will scroll through any additional services, and the LEFT/RIGHT buttons will scroll through earlier and later

STB & PVR Function 62 4-3. Service Change and Recording The procedure for changing service and setting timers differs, depending on your chosen se

Contents Contents Welcome Message iPrecaution ii 1. Package Contents 3 2. Introduction 51. FV-L1 Highlights 52. Front Panel 62-

STB & PVR Function 63 3) Set timer To set a timer for a future program, perform the appropriate procedure as follows;  For EPG Action = “Change

File Playback 64 6. File Playback This chapter covers all functions regarding playing multimedia content. The FV-L1 can play movie, music and phot

File Playback 65 1) Step 1: Select Content Type Use the UP/DOWN buttons to select the type of storage device you wish to access, as follows:  HDD:

File Playback 66 The networked devices are shown with icons to identify the type of device. A PC icon indicates a PC and a set-top box icon indicate

File Playback 67 WARNING  Each USB port can supply a maximum of 500mA to the external device. Connecting devices consuming more than 500mA can

File Playback 68 3) Step 3: Select File(s) You must now select the file(s) you wish to play. Press the OK button to enter the File list. Locate the

File Playback 69 2. Contents Playback 2-1. Movie Playback To play a movie, locate your chosen video file (see previous section “Exploring Contents”)

File Playback 70 1) Trick Mode During playback, the following trick mode operations are available;  PAUSE button: Freezes the picture until you p

File Playback 71 2) Bookmark Bookmarks can be placed at any position in the video file. This enables you to return to a chosen position easily.

File Playback 72 To display a list of all bookmarks placed, press the BLUE button. Use the UP/DOWN buttons to select a bookmark. To play from this

Contents 3. PVR Functions 473-1. Time-shifting 473-2. Instant Recording 483-3. Timer 503-4. Trick Mode Operation 553-5. Recording Co

File Playback 73 4) Subtitle The FV-L1 can decode and display subtitles from a subtitle file. To play a movie with subtitles, ensure the subtitle f

File Playback 74 2-2. Music Playback Music files are played in the same manner as video files. The same file selection functions, playback function

File Playback 75 During viewing, you can use the following functions;  LEFT or PREV button: Jumps to the previous photo in the File list.  RIGHT o

File Playback 76 2) View Files in Playlist To check the files in the playlist, select the ‘Playlist’ icon (above “HDD” in the Device menu) and press

File Management 77 7. File Management The FV-L1 has several functions to help you organise your media files. These functions allow you to; (i) creat

File Management 78 2. Delete To delete files or folders in a storage device, select the unwanted file(s) or folder(s) in the File list (see “Explorin

File Management 79 3. Auto Delete To set automatic deletion function to automatically delete unwanted recording files that are older than the specifie

File Management 80 5. Copy / Move To copy or move files to or from the FV-L1, select the desired file(s) in the File list (see “Exploring Contents” se

File Management 81 Use the UP/DOWN buttons to select a device and press the OK button (only for “Network” and “USB” device types). Now use the f

File Management 82 Once you have confirmed the copy or move function, a progress bar indicates the status, as shown below; While the copy or mo

This page intentionally left as blank.

File Management 83 6. Edit Recording File You can edit a recorded file. Editing allows you to; (i) remove commercial advertisements from a TV recordi

Internet Service 84 8. Internet Service The FV-L1 is designed to support various Internet services. Press wizTV button to access the services. You

Advanced Setup 85 9. Advanced Setup This chapter describes how to configure the Miscellaneous (“Misc.”) and System categories of the setup menu. Thes

Advanced Setup 86 2) All Service The third column shows all services that you can access. This list shows either all the TV services, or all the ra

Advanced Setup 87 1-2. OSD 1) Help Box Display You can hide the help box that is displayed with the service list. This will extend the service list

Advanced Setup 88 3) Colour Theme You can choose between 10 colour themes for on-screen menus and information boxes. 1-3. Access Contro

Advanced Setup 89 2) Access Control Several functions can be configured to require PIN number entry, as follows;  Censorship: To view a program

Advanced Setup 90 1-4. PVR 1) Time-shifting You can turn off the time-shift function to reduce the workload of the internal hard disk drive (HDD).

Advanced Setup 91 3) EPG Action You can control the action of the OK button when a future program (one not shaded light blue) is selected in the EPG

Advanced Setup 92  Soft Padding Priority: Determines how to resolve timer conflicts caused by the addition of pre-padding or post-padding. Select on